Turn off your maintenance light – Do it yourself

turning off maintenance light toyota camry

The Toyota Camry is a very popular model. It’s a small four door family car that gets great gas mileage and is generally reliable and safe. Camry has a gasoline engine so you’ll need to keep a spare tire handy at all times. If you forget to turn off the headlights or the radio or wiggle the steering wheel while driving the vehicle, it could very well run into trouble. If you don’t remember to do these things, and have another vehicle beside you that needs a brake light or turn off the engine, it could easily be fatal.

turning off maintenance light toyota camry


The lights will turn on when the vehicle is in an emergency stop. If you have a car that doesn’t really need a brake light, then it would be silly to try to navigate around a stopped automobile that has its lights on. Pedestrians could be hurt if they cross paths with a driver without his lights on. Drivers who are unable to see the road ahead have a greater chance of making a fatal mistake.

If you don’t remember to put the brake light on, there are a few simple steps that will make it easy for you to do so when you get ready to drive. You should remember that turning off the parking brake is the only way to safely drive a vehicle. When you turn the engine off, the engine loses pressure, but the tires won’t lose pressure, so you should always let your tires engage before you release the brake.


To prevent activating the parking brake, and the tires engaging without turning off your engine, press the button on the light indicator mounted on the dashboard. This button will turn off the lights, but it won’t engage the tires. Make sure you keep this particular button locked on a few occasions. Doing this prevents you from accidentally turning the engine off while driving, which is one of the leading causes of death related to cars in California. Another very simple step you can take is to turn the indicator knob all the way down.


If you forget to lock the lights, you should do the next best thing and start the car’s engine and run it for a few seconds. You should apply the brake pedal firmly while the engine is running. If you feel resistance, you should stop the engine and lock the light lever. If you forget to do either of these things, your maintenance manager may be able to remind you to do them. He may even come into your garage to show you what you are doing wrong.


When you come to turn the car off, you should always go to the brake pedal first. Next, pull the gas plug until it clicks. You should release the gas cap to release the bleed plug and drain plug. Pull the tires out and turn them off.


After you are done, make sure the brake is still tight and the tires are still on. You should then gently pull the steering wheel until you hear a squeak. This is a warning that the wheels need to be leveled. Next, raise the hood. Make sure the car is not leaning back.


These instructions are only general guidelines. They may not be applicable to your vehicle. You should check the instructions for your vehicle’s engine before you attempt to turn it off yourself. You should get the correct instructions from your local garage technician.

Like any car, you can perform an oil change on your vehicle. After that, it should be followed up with a thorough resetting maintenance. You probably know the value of your Toyota 4Runner. The money you can make from selling it off can be much higher than the cost of buying it. Hence, making it a point to perform a thorough inspection and oil change of your vehicle every year is a must.

resetting maintenance light on toyota 4runner


An engine, unless it is in good shape, tends to glow green if it has been given a thorough checkup. This is because the engine is a complex piece. There are many parts that need to work in unison to keep your vehicle running smoothly. Any small mistake can cause major problems. Hence, it is a very good idea to carry out a comprehensive check up on your vehicle’s engine each year.


Check your oil levels: This is the main reason why your engine light will come on in your car. It is highly recommended to perform a thorough oil check. If the oil level is too low, or too high, your engine will likely glow green. It is important to ensure that the oil level does not exceed the recommended levels. This is one of the easiest things to remember and should be performed every time your engine light goes on.


Spark Plugs: Not all vehicles will glow green with just a single spark plug. This is because your vehicle engine has to undergo a series of checks to ensure that there are no problems with the fuel system. Any part that is not working properly or is faulty will cause problems. A good spark plug and filter system will ensure that there are no leaks and ensure that your vehicle runs smoothly and effectively.


Oil Pressure: Just like any other engine, the oil in your vehicle should be checked regularly. Low oil pressure can indicate engine problems. This can cause your vehicle’s to run rough or stop working altogether. Make sure to get an oil sample and inspect it thoroughly. Oil changes will also help you keep the pressure at a good level. This will reduce the chance of your vehicle crashing completely.


Check for brakes and bearings: If your brakes don’t glow green, it could indicate a brake failure. You will need to visit a local shop for repairs. There are many different causes for this issue and it will vary from brand to brand. A faulty brake light means that your brakes are not working properly. It could also mean that the brake pads are wearing out and have become thin.


Engine Light: This is the most important warning light to be aware of. This issue can be fixed easily by you. There are many things that could go wrong with your engine, so it is worth visiting a local garage to find out exactly what is wrong.


If there has been any serious damage to the vehicle, it should not be driven. You should therefore never drive a vehicle if there are serious faults present. Any vehicle that has received a paint job should also be taken back to a garage as a precaution. This will prevent any further rusting or damage to your vehicle. If you don’t feel confident enough to take your vehicle to a garage, you can contact a trusted auto parts center. They will do all the work.

Be the first to comment

Leave a Reply

Your email address will not be published.