Whats a blind mortise?

You are learning about: “Whats a blind mortise?”. This is a “hot” question with 48,800,000 searches/month. Let’s fleetserviceshocrv.com learn more about Whats a blind mortise? in this article.


blind mortise noun Save Word Definition of blind mortise : a mortise that does not extend entirely through the material in which it is cut

What is a blind mortise and tenon joint?

A blind mortise and tenon joint is one where none of the tenon is exposed. The tenon is wholly encased in the mortise. A through mortise and tenon is one where the mortise goes all the way through the wood, allowing the end of the tenon to be exposed.

What are cheeks and shoulders on a mortise board?

The cheeks are the sides of the tongue or mortise, and the shoulder is the portion of the tongue-board that rests against the mouth of the mortise board. The length of the tenon is the distance from the end grain to the shoulder. The width of the tenon is the distance from tenon edge to tenon edge.

See also  What is the nationality of donnalyn bartolome?

What is mortise depth and width?

The mortise depth is the distance from the mouth of the mortise to the bottom of the mortise. The width of the mortise is sized to receive the tenon’s thickness. The mortise length is sized to accomodate the tenon’s width. A very important consideration for the design of mortise and tenon joints is wood movement.

What is the difference between a through mortise and tenon?

The tenon is wholly encased in the mortise. A through mortise and tenon is one where the mortise goes all the way through the wood, allowing the end of the tenon to be exposed. Sometimes the tenon may be cut flush with the side of the wood it is going through, but often it is allowed to stick through with bevel cuts to add a decorative element.


Quick \u0026 Easy Mortises


More about Whats a blind mortise?


1. What is a blind mortise? – AskingLot.com

Definition of blind mortise. : a mortise that does not extend entirely through the material in which it is cut.

From askinglot.com

2. Blind mortise Definition & Meaning – Merriam-Webster

Definition of blind mortise. : a mortise that does not extend entirely through the material in which it is cut.

From www.merriam-webster.com

4. What are the different types of mortise and tenon joints …

Jul 10, 2018 · Here, we’ll provide illustrations and explanations of each of the more common mortise and tenon joints, including blind, through, pinned, and wedged mortise and tenon joints. Blind Mortise and Tenon. A blind mortise and tenon joint is one where none of the tenon is exposed. The tenon is wholly encased in the mortise. Blind Mortise and Tenon …

From famousartisan.com

5. Everything you need to know about mortise and tenon …

May 05, 2021 · A blind mortise-and-tenon joint has the end of the tenon concealed. The mortise does not go all the way through the stock, the tenon stops half way, essentially disguising it so that it looks neater and more …

From sanrico.com

6. Blind vs Through Mortises? – FineWoodworking

Apr 07, 2004 · If you use a blind mortise local convention suggests a tenon about 1/3 the width of the mortised segment to a depth of about 2/3. However we don’t use a lot of Douglas fir in furniture, tending more to indiginous timbers which are a lot harder, so others may have a divergent opinion. Don.

From www.finewoodworking.com

8. Mortise and Tenon Joinery | Meridian Products

Nov 09, 2020 · The mortise is the hole that is cut into a board and the tenon or tongue is the piece that is shaped to fit into the mortise. Think of it as square peg going into a square hole. The Blind Mortise and Tenon Joint: This joint has the strength of a mortise and tenon joint but on the surface, it gives an appearance of a butt joint.

From www.meridianproduct.com

9. Blind-mortise-and-tenon joint | Article about blind …

blind-mortise-and-tenon joint A joint combining a blind mortise and a stub tenon ; neither is visible in the assembled joint. McGraw-Hill Dictionary of Architecture and Construction.

From encyclopedia2.thefreedictionary.com

10. Hand Cut Mortise and Tenon Joints

Jul 02, 2020 · Trim the ends of the mortise with a chisel that’s the same width as the tenon. To cut the tenon, clamp the stock vertically into a sturdy bench vise and use a fine-toothed saw (tenon saw, backsaw, Japanese dozuki, etc.) to carefully cut down the cheek lines to the shoulders. Use the scribed lines to line up the saw teeth, erring to the outside …

From www.rockler.com


You are viewing in the category Quick Answer